Video Transcript
Scene Scheduler
5m 31s
00:07
Let’s talk about scenes and scheduling on the MP-M Series mixers.
00:11
These are helpful if you have specific settings for given times of the days,
00:15
like a lunchtime setting vs. a dinnertime setting.
00:17
Or maybe you have a specific preset for Game time,
00:20
or when you have live bands plugging into your system.
00:23
You can create scenes for these scenarios and if you want,
00:25
you can schedule them to automatically deploy at certain times or days.
00:29
Let’s start by checking out scenes first by going to the Menu and selecting Scenes.
00:37
This page should look pretty familiar,
00:39
as you’ve seen something like this in several other places in the app.
00:42
Scenes may be saved on your device where you’re running the MP-M app,
00:46
or internally on the MP-M device, or on a USB drive,
00:51
and you can copy your scenes from any of these devices to the other.
00:54
Once you select a Scene, use the Recall button to apply it.
00:58
A Scene records the values for all settings for input channels, output channels, and the mixer selection.
01:04
So be careful,
01:05
because you might override a lot of the decisions you’ve made in your system if you use Scenes carelessly.
01:10
With that in mind, there are certain input and output channels that you might want to write-protect,
01:15
to make sure they are never changed when you recall a scene.
01:18
You can do this by navigating to that channel’s Setup screen and engaging the “Channel Safe” option.
01:25
When Channel Safe is on, a Scene recall will have no effect on this channel’s settings.
01:31
Another safeguard you have is choosing which aspects of the Scene you want to apply when you Recall it,
01:37
with these switches here.
01:38
Notice that these are labeled as “Omit” switches,
01:41
which means that by default every aspect of your inputs and outputs will be included in the Scene,
01:47
unless you choose to omit something.
01:49
You can choose to omit your input Levels & Sources from the Scene by engaging this button,
01:55
or you could choose to omit all outputs or not by engaging this one.
01:58
Again – if these are off, that means the described element is included in the Scene Recall.
02:04
Perhaps you have a Happy Hour in your bar
02:06
which will automatically recall a particular audio source to your zones,
02:10
but you don’t want this action to change the output level that your bartender has already set at the time -
02:15
—in this case, you would exclude the outputs.
02:18
On the other hand,
02:19
your coffee shop might have different presets to extend the mix of your live performer to the outside patio zones,
02:26
but you obviously don’t want to change anything about the inputs when you do this…
02:30
… in this case, you would build a scene that excludes the input levels.
02:34
Let’s create a few scenes right now for Patrick’s Diner.
02:37
Let’s create a lunchtime scene which has our gains set at a fairly low level.
02:43
We’ll simply select Save,
02:45
and give this scene a name of Lunch Scene, and specify which inputs and outputs it applies to.
02:54
Then we’ll go in and adjust those gains a bit higher for dinnertime
02:59
(because Patrick’s Diner is awesome at night),
03:03
and save that as a different scene.
03:05
Once both scenes are built,
03:07
all you have to do to recall one or the other is to select one from the Scenes page and press the Recall button.
03:14
However, there are several other ways to recall a scene, too.
03:18
When you’re setting up an MP-MFC,
03:20
you can select which scenes can be recalled from that device by enabling them in this column.
03:26
Then, on the device, simply double-tap the Select button to see your list of available Scenes.
03:32
You can also recall and save scenes on a smartphone running the MP-Manage app,
03:37
provided that the user in question has been granted the permissions to do so.
03:41
The final way is to Schedule your scene recalls, which you can do with the Scheduler.
03:47
This is available in both the MP-Install app and in the MP-Manage app, to users with that permission.
03:54
From the menu, select Scheduling, to see this screen.
03:57
Here, a scheduled recall is called an Event.
04:01
You’ll see your upcoming events listed in the left pane,
04:04
and the ability to create new Events in the middle section.
04:08
If you want to make an adjustment to an event you can select it and change its settings,
04:12
but let’s create a New Event first.
04:14
Choose a name for your event, and whether or not this event is currently active.
04:20
This is a useful feature – if you want to de-activate an event temporarily,
04:24
you can turn off this switch rather than deleting the event entirely.
04:29
Then, select the date and time that you want this Scene recall to activate,
04:33
and, of course, which Scene should be recalled.
04:37
The Scheduling depends on the internal clock of the MP-M – if the MP-M is connected to the internet,
04:43
then its internal clock will be automatically updated.
04:46
If it is not connected to the internet,
04:48
the clock may be set to match the time of a connected device from the Settings screen.
04:53
Just go to Menu > Settings > Sync MP-M to App Time.
04:59
Back in the Scheduler…
05:00
If you want this scene to repeat, you could choose its repeating behavior from daily,
05:06
weekly, monthly, weekdays, or weekends, and then the end date.
05:10
If this is just a one-time event, then select “No Repeat,” and then don’t worry about that End Date.
05:18
There’s not much more to it than that.
05:20
You can use the Scheduler to automate your venue for all your regular events,
05:24
or manually recall Scenes from your control devices.
05:27
Thanks for watching.
Lesson Description
Scene Scheduler
5m 31s
Explanation of saved scenes and how to recall them, including the automated Scheduler, in the MP-M Mixer.