You're almost ready for class!

Anzeigen




As your final portion of the online training you are required to build a very simple design file. This file will be your starting point with the software in class, so you'll need to bring it with you. 





Step 1

Here's what you should have in your design file:

  • An Audio Player with a Track Count of 2
  • A Matrix Mixer with 1 stereo input and 1 mono output
  • A Parametric Equalizer
  • A True Peak/RMS Meter


Step 2

Wire the design to meet the following criteria:

  • Use the Matrix Mixer to sum the channels of the Audio Player.
  • Wire the output of the Mixer into the Parametric Equalizer.
  • Send the output of the Parametric Equalizer to the True Peak/RMS Meter.
  • Place the True Peak/RMS Meter on it's own schematic page.
  • Use at least two of the three different types or wiring to connect all of the components.


Step 3

Add the following inventory items:

  • 1 x TSC-7 Touchscreen Control Panel (Found under peripherals)


Once this is done, save the file and bring it with you to class!


Congratulations! You're half way to certification status!

Zuletzt geändert: Monday, 20. June 2016, 11:15
Zuletzt geändert: Monday, 20. June 2016, 11:15