FX Wizard

TouchMix Training (Italiano) : FX Wizard

1 ) Introduzione al TouchMix

2m 3s

2 ) Navigazione del mixer

3m 16s

3 ) Modalità semplice / avanzata

2m 37s

4 ) Librerie di preset

5m 39s

5 ) FX Wizard

5m 59s

6 ) Effetti avanzati

4m 16s

7 ) Procedura assistita del guadagno

3m 8s

8 ) Funzioni di registrazione

7m 15s

9 ) Adv. Registrazione e riproduzione

7m 15s

10 ) Aggiornamento del firmware

4m 21s

11 ) TouchMix 8/16 Firmware v3.0

4m 25s

12 ) TM-30 Pro: Panoramica

5m 42s

13 ) TM-30 Pro: Procedura guidata di feedback

5m 11s

14 ) TM-30 Pro: Copia e incolla

3m 0s

15 ) TM-30 Pro: DAW

4m 44s

16 ) TM-30 Pro: RTAs

5m 46s

17 ) TM-30 Pro: Patch Matrix

5m 37s

18 ) Valutazione

Trascrizione Video

FX Wizard 5m 59s
0:07
Today we’re going to introduce you to the onboard effects processors on the TouchMix,
0:11
and show you how to use the FX Wizard to add effects to your performance.
0:15
Audio effects like reverb, chorus, delay, pitch correction and
0:19
pitch change are essential in today’s audio production.
0:23
The TouchMix may just give you more effects processing than you’ve ever had before.
0:27
But using effects can be a bit intimidating.
0:29
So stick with us, because the payoff is a professional sounding live performance.
0:34
First, let’s take a look at the architecture of the effects section. Imagine this:
0:43
Inside TouchMix is a virtual equipment warehouse. In the warehouse are 24 effects processors.
0:50
4 Chorus Processors, 4 Pitch Change Processors,
0:54
4 Dense Reverb Processors, 4 Lush Reverb Processors,
0:58
4 Mono Delay Processors, and 4 Stereo Delay Processors.
1:03
You can choose any 4 of these processors in any combination to use at any one time.
1:10
Each of these processors has multiple presets.
1:13
The reverb processors, for example, will have presets simulating various sizes of rooms
1:17
and halls as well as reverb plates.
1:20
There may also be brighter or darker sounding variations and presets with longer or shorter reverb times.
1:27
We can send the signal from any of the inputs to any effects processors.
1:31
Once the processor has done its job by adding the “wet" sound
1:35
that’s what we call the sound that’s been processed through the effect –
1:38
it can be blended back with the “dry", unaffected sound from the inputs and sent on to the mixer’s outputs.
1:44
Now that we’ve got a feel for how the effects work, let’s talk about what you’re going to use them for.
1:49
Let’s say that you have a large band with a sax player, some vocalists, and a fully-miked drum kit.
1:56
In this example, we’re going to use the factory default presets.
1:59
Don’t be afraid to use these. We designed them to be useful in a lot of different situations.
2:04
In this hypothetical band, the lead vocalist will be sent to a 250 msec.
2:08
delay that will be mixed in at a low level to provide a bit of thickening.
2:18
Horns and all the vocals will be given a bit of “space" with a Medium Hall Reverb.
2:28
The snare and toms are all going to have a Medium Plate Reverb applied to them.
2:36
Plate reverb is a go-to effect for drums in a live sound environment.
2:41
Note that you can send a channel to more than one effect.
2:44
Our sax is also being sent to a Pitch Shift effect with a Light Detune preset.
2:49
This will provide a subtle doubling.
2:55
Other instruments either don’t need any effects or have their own effects like guitar pedals
2:59
or internal effects on a keyboard, so we’re going to leave those dry.
3:03
So now you understand the TouchMix effects and you’ve thought about what to do with the effects,
3:08
let’s talk about the HOW. There are several ways to select and set up effects on the TouchMix.
3:14
Today we’re going to focus on the fastest and easiest method – which is the FX Wizard.
3:19
Much like the Channel Presets, or pretty much anything else you find on the TouchMix,
3:24
the FX Wizard is designed to help you get the most out of a live performance.
3:28
So let’s say that you need to add some reverb to a tom drum,
3:32
but you don’t know which one is the best for your scenario.
3:35
Well, the Wizard helps you out with that. Let me show you what we mean.
3:38
Start by pressing Wizard, then FX Wizard.
3:43
If this is your first time using the FX wizard, the Mixer will default to FX processor 1.
3:48
Select a Preset by choosing the Source, Type and FX Style windows to choose an effect.
3:54
You’ll notice that not all the reverb types in the TouchMix are available for selection
3:58
just the ones that are most relevant and appropriate for the selected source.
4:03
So just like the previous example where we selected a Plate reverb for the toms,
4:07
you’ll see the Plate Reverb is available for use here,
4:10
while Hall reverb, an effect that might muddy up the drums in a mix, is not. Pretty smart, right?
4:16
Use the Master Encoder to scroll up and down the list or drag on screen to see all the selections.
4:22
Touch Recall once you’ve made a choice and confirm.
4:26
The Preset Name will be displayed below the Type window.
4:29
The preset has now been loaded, and now it’s time to send audio to FX1.
4:34
On your mixer, just decide which channels you want the effect to apply to
4:38
and touch the corresponding button under “Select Inputs to Feed."
4:42
The selected channels are now feeding the effects processor.
4:46
The moment you’ve selected an input, it is automatically sent to the effects processor,
4:50
and returned again, all at a nominal level.
4:53
You don’t have to adjust anything else.
4:55
Now, is your performer going to want to hear effects in his stage monitor? If so, that’s easy to do.
5:01
Just select the buttons under “Select Aux Outputs" to tell your mixer where the effect should go.
5:07
If you find that you’d like to change the level of the effect, you can use the Master FX fader here.
5:12
You’ve still got three effects available,
5:15
so touch one of the tabs on the top of the screen to set up another effect.
5:18
And that’s it. You’ve set up all your effects.
5:22
And here’s one more tip. The TouchMix has an FX Mute button.
5:26
You can use it to mute all the effects at the same time.
5:29
This is really useful when a singer is talking between songs
5:33
and you don’t want to hear reverb and delay on speech.
5:36
We’re going to use it right now to demonstrate the difference that effects have on a mix.
5:49
That’s it for this installment. If you want to dive even further into using effects,
5:53
check out our next installment: Advanced Effects.
5:57
We’ll see you then.

Descrizione della lezione

FX Wizard 5m 59s

Se sei novizio per quanto riguarda effetti come riverbero, chorus, delay, la correzione della tonalità e il cambiamento di pitch, questo tutorial ti indicherà come utilizzare la procedura guidata FX.