Audio Components
| Site: | QSC |
| Course: | Q-SYS Level 1 Hybrid |
| Book: | Audio Components |
| Printed by: | Guest user |
| Date: | Saturday, 23 November 2024, 1:57 AM |
Description
Video Transcript
0:08
Welcome back to another QSC Q-SYS Designer software tutorial.
0:11
In this tutorial we’re going to briefly cover some of the other features of the software
0:15
and go over some of the DSP components that you’ll find.
0:18
Now by now you’re probably familiar with the Left and the Right-Side Pane,
0:22
so we’re going to start in the Schematic Library …here in the Right-Side Pane.
0:27
This is where you’ll find all of the DSP to add to your system,
0:30
and to do so is as easy as clicking on the component that you want and dragging it into your Schematic.
0:35
Now there are three branches here you have your Audio Components, Control Components, and Layout.
0:42
Now the Audio Components are going to affect your audio. Some of these are simple,
0:47
some of them have their own tutorial videos, we’ll go through them real quickly right now.
0:51
The Audio Player plays MP3s and WAVs that are loaded to your core.
0:55
Audio Streaming lets you connect to another device on your network to either send or receive a streaming signal.
1:02
Crossfader lets you fade between two channels.
1:06
A Crossover divides your signal into different bandwidths to distribute them to different loudspeakers,
1:11
Delay will introduce a signal delay. The Dynamics – you’ve got a lot of options here
1:17
it branches out and you can see things like a Compressor, an Expander, a Peak Limiter,
1:21
these all let you adjust the signal dynamics, and this also has the Gated
1:25
and Continuous Ambient Compensator which will help take out background noise,
1:30
and there’s a separate tutorial on how those two work.
1:33
Moving on, you’ve got Effects – this branch gives you a lot of common effects,
1:37
things like your Doppler, the Echo, and the Flanger, these are all customizable of course.
1:41
Equalizers and Filters branches out, this gives you a lot of things like your Low-Pass Filter,
1:47
and a Graphic Equalizer, Parametric Equalizer, there’s other filters of course.
1:52
The Gain here gives you a gain adjustment to your signal,
1:55
the Gain Ramp will create a timed adjustment to the gain,
1:59
a Meter will create an RMS Meter for your signal wherever you attach it, the Mixers
2:04
we’ve got four different mixers in here – and a few of these like the Gated Automatic Mixer
2:09
and the Gain-Sharing Automatic Mixer, we’ll cover these in other tutorials.
2:14
Public Address lets you set up your Paging System with the PA Router and the Virtual Page Station.
2:22
The Room Combiner lets you create a system for a room that has removable air walls on it
2:27
and this one also has its own tutorial.
2:29
Router provides simple channel routing, a Signal Presence will let you use
2:34
you can use it to detect the existence of an output signal,
2:36
System Mute will obviously mute the system – a lot of these are very self-explanatory,
2:41
and then Test and Measurement offers a bunch of tools for testing your system
2:45
and we’ve got a tutorial on that as well.
2:48
So we’re not really going to go into all of these components in this tutorial
2:51
– we just want to show you where they are,
2:53
and they’re really easy to use as long as you know how to access them, drag them into your Schematic,
2:57
wire them together, open their control panels, you should be familiar with all of these things by now.
3:01
If you ever find something you don’t understand,
3:03
they all have very detailed help files so feel free to check out that database as well.
3:07
One thing I would like to show you, though, is some of the ways you can customize a component.
3:12
So let’s go over here and grab a Matrix Mixer and drag that into our Schematic.
3:17
One thing you can customize is adding control pins.
3:20
If you go to the Right-Side Pane and take a look at the Control Pins menu, then you can toggle extra pins.
3:28
For instance if I check the Input 1 > Mute control pin here,
3:33
you’ll notice that I’ve got a new bar on my component that I can wire with new pins.
3:38
What these do is allow you to create unique logic and scripting interaction between components.
3:44
So let’s say that whenever this input goes Mute, I want a specific audio file to play
3:50
so what I could do is wire the control pin for this Mute to the Play button of that Audio Player,
3:57
and then it would do it for me. So there’s a lot of cool things you can do like that.
4:01
Now another way that you can customize components
4:04
is within their Properties the properties of that actual component.
4:08
Let’s say that on this Mixer I want to change the inputs – let’s change the inputs from 8 down to 4
4:16
you can see that reflected, now we have only four inputs. Let’s change it all the way up to 254.
4:25
now we’ve got a whole lot of them.
4:27
And you can see that if we open this up, that 254 is clearly more than we can even see on the screen,
4:35
right here we’ve got about thirty of them. We’ve got this new bank up here that says Input Bank
4:41
which will allow us to toggle which set of thirty-two inputs at a time we’re actually even looking at.
4:48
So even that aspect of the component will change based on what you’ve done to it.
4:55
Let’s turn this back to something manageable again, let’s make this 4 by 4,
5:01
and say goodbye to our input bank. Now another thing you can do for this mixer,
5:05
for instance, is we can change it to something visually different entirely.
5:09
Let’s go to this 2-D Matrix Panner and select Yes.
5:13
Now the visual representation of this component is completely different and I’ll show it to you,
5:17
I’ve got to enter Emulation Mode here by hitting F6,
5:21
now this mixer is no longer controlled by those gain knobs,
5:24
but you drag your input closer or farther away from certain outputs
5:30
and that controls the volume that you want that input to go to.
5:34
Ultimately the point is that the component you pull out of the Schematic Library
5:38
might not look like what you’ll end up changing it to,
5:41
so you should really spend a lot of time looking at all the properties
5:43
for your components so you can find out what it is that they’re capable of.
Lesson Decription
Briefly explores the available audio components, and how to customize a component.
Tips and Definitions
Schematic Library: Located in the Right-Side Pane, this is the source for all DSP and Control components that can be dragged into the Schematic.
Test and Measurement: This branch of the Schematic Library contains useful components to test and measure your signal path. More information on these components will be presented in a later module.
Control Pins: These pins allow the control they are associated with to be manipulated by another component. To add a control pin for a control, simply select the component, go to its Control Pins panel in the Right-Side Pane, and check the box of the control you would like to add a Control Pin to.
Customizing a Component: Different components are customizable in different ways. Click on a component and look at its Properties panel in the Right-Side Pane to find the available customizable options for that particular component. All components can have their names, positions, and colors changed, and many components have unique features that can be made available by altering their properties.