K.2: Back Panel Navigation

Hi everybody, Chris here from QSC,

in this video we’re going to show you how to navigate the user interface panel on a K.2 speaker.

The K.2 Series offers a new user interface experience.

Channel A has the ability to select between Line or Mic Level input.

Channel B can be Line or Hi-Z instrument level input for a passive pickup system.

The PRESET section gives the ability to select one of eleven different presets based on your application.

Everything from LIVE presets to application presets all the way to a studio monitor preset for studio mixing.

An adjustable crossover allows you to select a crossover frequency that matches the subwoofer that you’re using with your PA system.

Up to 100 milliseconds of delay time can be added to the box.

And a Four band parametric EQ can be adjusted to tailor the sound the way that you would like.

And in the settings section you can save it all as a SCENE and recall it later once you dial it all in.

With your independent gain controls for each channel,

you’ll see we have a third input with an 1/8th inch stereo jack, so that now you can plug in your phone or personal music player device.

Channels A and B have either an XLR or balanced ¼” input.

The XLR outs directly underneath are parallel line-level outputs pregain outputs

that can be taken out to a mixer, or daisy-chained to another speaker without affecting the signal.

And then the MIX OUT is the post gain mixed output of all three channels summed together.

Now that you know how the user interface works on the K.2 speaker,

you can connect, adjust, and tailor your sound to be just the way you want it.