Intro to Q-SYS Video Distribution
| Site: | QSC |
| Course: | Q-SYS Video 101 Training |
| Book: | Intro to Q-SYS Video Distribution |
| Printed by: | Guest user |
| Date: | Thursday, 21 November 2024, 3:31 AM |
Description
Video Transcript
00:08
Hi! Today we are going to talk about NV Series networked video endpoint peripherals
00:12
that allow native video distribution in the Q-SYS Ecosystem.
00:15
Or, in layman’s terms,
00:16
we can now route HDMI video and audio over the network! Yay!
00:20
Audio, video and control, here we come!
00:23
Now whether you are transporting that audio and video from one side of the meeting room to the other,
00:28
or all the way across campus, as long as they’re on the same network, and a part of your Q-SYS design,
00:34
you can do it!
00:35
In this video series we’re going to cover the basics of video formats and protocols,
00:39
we’ll look at the ins and outs of this device and the codec,
00:42
as well as how to wire it inside the Q-SYS Designer software.
00:45
And because we’re talking about video,
00:47
you better believe we’re gonna jam this series with all the movie quotes we can!
00:51
So hold onto your butts…
00:53
‘cause we’re turning it up to 11.
00:55
The first thing to know is that there is only one model in the NV Series, the NV-32-H.
01:02
We don’t have a separate “encoder” model and a “decoder” model,
01:05
because this single unit is software definable,
01:08
which means that you can configure it as an encoder or decoder within the software.
01:13
It is “The One.”
01:18
If you look at the back of the unit you’ll notice it has three HDMI inputs and 2 HDMI outputs.
01:24
When the unit is set as an encoder,
01:26
you’re primarily bringing HDMI video and audio into the Q-SYS Ecosystem.
01:31
However, you can also use one of the HDMI outputs as a display for these local HDMI inputs as well,
01:38
for use in a confidence monitor scenario.
01:41
Likewise, when the device is set as a decoder,
01:44
you’re primarily decoding HDMI video sources from the network to one or two displays,
01:50
again depending on your desired resolution.
01:53
However, in addition to decoding video sources from the network,
01:57
you can also switch to one of the three local HDMI inputs on the device for local switching options as well.
02:04
If you haven’t caught on yet, this one model is incredibly versatile…
02:08
… but don’t worry, you can cross the streams as much as you want.
02:12
I thought you said crossing the streams was bad.
02:14
No, not in this case.
02:15
The other really cool thing about the NV Series is its codec —
02:20
or, the way it handles compression and decompression.
02:22
If you know anything about video distribution, especially for the meeting room,
02:26
you know that you’re always trying to strike a gentle balance between quality, bandwidth and latency.
02:32
And, you probably also know that sometimes IT personnel are cautious
02:36
about putting video on the network for fear of it gobbling up bandwidth unnecessarily.
02:42
However, the NV Series uses QSC’s proprietary video codec called Shift,
02:48
which dynamically adjusts the network bandwidth required based on the content being displayed,
02:53
which affords massive network bandwidth savings for most common meeting room installations.
02:58
You see, shift codec doesn’t necessarily re-transmit every single pixel in every single frame
03:04
if that content has not changed.
03:06
Think about a meeting in which you’re displaying a graph in a PowerPoint presentation –
03:10
– that graphic isn’t going to change for a while …
03:13
in a really boring meeting, maybe a very long while!
03:16
Who wants to read first? I'll go... so, this shows...
03:23
So shift provides incredibly clear clarity of content while minimizing the bandwidth required,
03:28
and you can see the change in that bandwidth in the control panel too.
03:32
However, shift looks incredible with full motion video as well,
03:36
it just means the system will require higher bandwidth during that time.
03:40
Finally, it’s worth noting that all of the video routing and control is happening at the software layer
03:46
within the Q-SYS environment –
03:47
– there’s no separate hardware endpoint manager or control processor
03:51
because it’s all managed by the Q-SYS Core.
03:54
In the next video, we’ll be going over the basics behind video formats, HDCP and EDID,
04:00
along with a few specific resolution and stream counts from each NV-32-H peripheral.
04:06
Thanks for watching and we’ll see you next time!
Lesson Description
Welcome to the Video 101 training course! Start the process of learning how to route HDMI video and audio over the network using Q-SYS.