Custom Fader Banks
| Site: | QSC |
| Course: | TouchMix Training |
| Book: | Custom Fader Banks |
| Printed by: | Guest user |
| Date: | Thursday, 21 November 2024, 2:35 AM |
Description
Lesson Description
In this video we demonstrate how to create a custom bank of your favorite or most used faders on a single bank quickly and easily using the TouchMix 30 Pro with firmware v2.0 and higher.
Video Transcript
0:07
The fader bank scheme on TouchMix-30 Pro is great. It’s practical and laid out in a linear fashion,
0:13
which makes it very easy to navigate between the different banks of faders on your screen. But, what if
0:18
you wanted to change which faders were presented to you in a certain bank? Maybe you are only
0:22
using a couple of input channels but also need to access an FX fader or a DCA or sub group faders?
0:29
In this video we’re going to show you how to use custom fader banks on the TouchMix-30-Pro to get
0:34
the most show critical channels of your application in a single bank.
0:38
Before we continue, make sure your TouchMix is using firmware version 2.0 or later. If you need
0:43
some more information on updating firmware, I’d recommend watching our “How to update your
0:47
firmware video”. You can find the link in the description.
0:50
To create a custom fader bank, first press the “Menu” button. Now select “Custom Banks” under the
0:56
setup section. From this screen you can choose one of three banks to customize at the top of the
1:01
screen. It’s a good idea to give the custom bank a name to help stay organized and avoid confusion.
1:06
Once the bank is selected and named, press one of the 8 available fader buttons. Now assign which
1:12
channel you want that fader to represent using the assignment buttons below. Once you’ve made
1:17
your assignments, the change is effective immediately.
1:20
To use your new custom fader bank press the “Home” button to return to the main faders and press
1:25
the “Custom faders” button in the upper left-hand corner. You will see the faders rearrange according
1:30
to the assignments you have selected. The custom bank name is also displayed above the bank
1:34
navigation button at the top of the screen. Pressing the “Custom Faders” button again will return the
1:40
bank to its default setup. You can toggle back and forth between the default and custom banks as desired.
1:47
And that’s it! It’s that simple. Thanks for watching this video. We’ll see you next time.